Product ID:0103 ALUMINUM LIQUID RESIN 16710
MSDS Date:02/14/1996
FSC:8040
NIIN:00F056374
MSDS Number: CHPLT

ITW DEVCON CORPORATION

30 ENDICOTT ST
DANVERS, MA 01923-5000
US

Emergency Phone: 978-777-1100

Info Phone: 978-777-1100

Cage: 16509

ITW DEVCON CORPORATIO

DANVERS, MA 01923 US

Telephone: 508-777-1100

Cage: 16509

OSOXIDE 8, C12 AND C14 ALKYL GLYCIDYL ETHERS *98-2*

CAS: 68609-97-2

Fraction By Weight: 1-10%

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 20-40%

LD50 LC50 Mixture:ORAL LD50(RAT): >10 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: MODERATE IRRITANT. CAN
CAUSE THERMAL BURNS. SKIN SENSITIZATION. INHALATION: IRRITATION IN
THE RESPIRATORY TRACT. INGESTION: LOW TOXICITY. PROLONGED/REPEATED
SKIN CONTACT MAY CAUSE DERMATITI S.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, ITCHING, REDNESS, TEARING,
COUGHING, GASTRIC DISTRESS, SWELLING, RASHES
Medical Cond Aggravated by Exposure:PREEXISTING EYE & SKIN DISORDERS.
DEVELOPMENT OF PREEXISTING SKIN/LUNG ALLERGY SYMPTOMS MAY INCREASE.

First Aid:EYES: FLUSH W/CLEAN WATER FOR 15 MINS. SKIN: IMMEDIATELY
FLUSH W/WATER. WASH THOROUGHLY W/SOAP & WARM WATER. INHALATION:
REMOVE TO FRESH AIR. GIVE OXYGEN IF BREATHING IS DIFFICULT.
INGESTION: DON'T IN DUCE VOMITING. GIVE 2 GLASSES OF WATER TO
DILUTE IF CONSCIOUS. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:>200F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Fire Fighting Procedures:MATERIAL WON'T BURN UNLESS PREHEATED. DON'T
ENTER CONFINED SPACE W/O FULL BUNKER GEAR. WEAR SCBA, PROTECTIVE
CLOTHING. COOL FIRE EXPOSED CONTAINERS W/WATERSPRAY
Unusual Fire/Explosion Hazard:HEATING >300F IN THE PRESENCE OF AIR MAY
CAUSE SLOW OXIDATIVE DECOMPOSITION & >500F MAY CAUSE
POLYMERIZATION.

Spill Release Procedures:AVOID CONTACT. ELIMINATE IGNITION SOURCES.
VENTILATE AREA. DIKE/CONTAIN/ABSORB W/CLAY/SAND/OTHER ABSORBENT.
LARGE: PUMP TO STORAGE/SALVAGE VESSELS. SOAK UP RESIDUE W/AN
ABSORBENT & DISPOSE OF PROPERLY . FLUSH WARE W/WATER TO REMOVE
TRACE RESIDUE. (SUP

Handling and Storage Precautions:STORE IN A COOL, DRY AREA AWAY FROM
HIGH TEMPS, FLAMES & FROM OXIDIZERS. HANDLE MIXED RESIN & HARDENER
IAW/THE HAZARD OF THE CURING AGENT USED.
Other Precautions:PROVIDE APPROPRIATE VENTILATION/RESPIRATORY
PROTECTION AGAINST DECOMPOSITION PRODUCTS DURING WELDING/FLAME
CUTTING OPERATIONS & TO PROTECT AGAINST DUST DURING
SANDING/GRINDING OF CURED PRODUCT. AVOID CONTACT W/SKIN/EYES &
CLOTHING.

Respiratory Protection:NONE REQUIRED AT NORMAL TEMPS & CONDITIONS. USE
NIOSH APPROVED ORGANIC VAPOR CARTRIDGES FOR UNCURED RESIN &
DUST/PARTICLE RESPIRATORS DURING GRINDING/SANDING OPERATIONS OF
CURED RESIN.
Ventilation:LOCAL EXHAUST: PREFERRED. GENERAL MECHANICAL: ADEQUATE FOR
MOST INDUSTRIAL APPLICATIONS. LOCAL EXHAUST: CONFINED AREAS.
Protective Gloves:CHEMICAL-RESISTANT
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:EMERGENCY SHOWER, EYE WASH
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. DISCARD CONTAMINATED LEATHER ARTICLES.
Supplemental Safety and Health
SPILL CONT'D: PREVENT SPILL FROM ENTERING DRAINAGE/SEWER SYSTEMS,
WATERWAYS & SURFACE WATERS. WASH THOROUGHLY W/SOAP & WATER AFTER
USING & BEFORE EATING/DRINKING/SMOKING/USING TOILET FACILITIES.

Boiling Pt:B.P. Text:>400F
Vapor Density:>1
Spec Gravity:1.92
pH:7
Evaporation Rate & Reference:(BUTYL ACETATE=1): <1
Solubility in Water:<0.1
Appearance and Odor:DARK GRAY PASTE W/LITTLE ODOR
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
LEWIS/MINERAL ACIDS, OXIDIZING AGENTS, MINERAL & ORGANIC BASES,
ALIPHATIC AMINES, SILICONE TETRAFLUORIDE
Stability Condition to Avoid:OPEN FLAME, EXTREME HEAT
Hazardous Decomposition Products:OXIDES OF CARBON, ALDEHYDES, ACIDS &
OTHER ORGANIC SUBSTANCES

Waste Disposal Methods:INCINERATE/DISPOSE OF IN ACCORDANCE W/LOCAL,
STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.